Cold Filter Plugging Point

ASTM D6371 IP 309 EN 116 DIN 51428 (obs) COLD FILTER PLUGGING POINT OF DIESEL AND HEATING FUELS
This test method covers the determination of the cold filter plugging point (CFPP) temperature of diesel and domestic heating fuels.

COLD FILTER PLUGGING POINT – CFPP
PVC structure fitted with: dewar flask with cover, brass jacket Ø48×115 mm outside, test jar Ø31×125 mm flat bottomed and mark at 45 ml level, insulating ring thickness 6mm, to be placed in the bottom of the jacket, two spacers to be placed as around the test jar to provide insulation for the test jar from the sides of the jacket, a supporting ring for suspend the jacket, a pipet with a calibration mark corresponding to a contained volume of 20 mL at a point 149 mm from the bottom of the pipet, a metallic unit filter, a stopper with trhee holes one for thermometer one for pipet and one for vent, two 5 liters bottle with stopper, stopcock and U-manometer.

Technical specifications:
– Dimensions: 330×500 mm (Øxh)
– Weight: 9 kg.

SEMI -AUTOMATIC COLD FILTER PLUGGING POINT – CFPP
Resistant structure painted with anti-acid epoxidic products, fitted with 4 wheels with brake. Glossy-black PVC cover with small stand-by covers aluminium block with 1 hole for accomodate the test jar, equipped with a hole where the thermometer is placed, heating element controlled by a indipendent switch for a quick return to a ambient temperature. Temperature is controlled by digital thermoregulator fitted with a probe PT100 A. Automatic defrosting device under the cover, earth leakage circuit breaker, double stage compressor CFC free refrigerant gases are used. Brass jacket Ø48×115 mm outside, test jar Ø31×125 mm flat bottomed and mark at 45 ml level, insulating ring thickness 6mm, to be placed in the bottom of the jacket, two spacers to be placed as around the test jar to provide insulation for the test jar from the sides of the jacket, a supporting ring for suspend the jacket, a pipet with a calibration mark corresponding to a contained volume of 20 mL at a point 149 mm from the bottom of the pipet, a metallic unit filter, a stopper with trhee holes one for thermometer one for pipet and one for vent, two 5 liters bottle with stopper, stopcock and U-manometer.

Technical specifications:
– Temperature: from ambient to -70°C (-94°F)
– Power supply: 220V 50Hz
– Power: 1300W

– Dimensions: 60x70x160 cm
– Weight: 118 kg

Semi-automatic Cold Filter Plugging Point - CFPP

Semi-automatic cfpp