Pensky-Martens Automatic

ASTM D93 IP 34 EN 22719 ISO 15267 ISO 2719 DIN 51758 FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER
This test method cover the determination of the flash point of petroleum products in the temperature range from 40 to 360°C by a manual Pensky-Martens closed-cup apparatus or an automated Pensky-Martens closed-cup apparatus, and the determination of the flash point of biodiesel in the temperature range of 60 to 190°C by an automated Pensky-Martens closed cup apparatus. Procedure A is applicable to distillate fuels (diesel, biodiesel blends, kerosine, heating oil, turbine fuels), new and in-use lubricating oils, and other homogeneous petroleum liquids not included in the scope of Procedure B or Procedure C.
Procedure B is applicable to residual fuel oils, cutback residua, used lubricating oils, mixtures of petroleum liquids with solids, petroleum liquids that tend to form a surface film under test conditions, or are petroleum liquids of such kinematic viscosity that they are not uniformly heated under the stirring and heating conditions of Procedure A.
Procedure C is applicable to biodiesel (B100). Since a flash point of residual alcohol in biodiesel is difficult to observe by manual flash point techniques, automated apparatus with electronic flash point detection have been found suitable.

PENSKY-MARTENS SEMI AUTOMATIC
PENSKY-MARTENS AUTOMATIC
with automatic flash point sensor and atmospheric pressure sensorAutomatic Pensky Martens

The flash point apparatus has a automatic temperature ramp, flash sensor, glass PT100, electrical and gas ignition system, ramp precision of 0.1°C, Real time operating system with S.D.M. software application, network connection and remote control of the instrument, 2xUSB host+client ports, serial RS232 port, USB, ethernet and serial printer with PCL support, Custom method, ramp and setpoint test procedure, TFT touch screen display with 800×480 screen resolution. Dual scale with °C and °F of choice, Tested with certified product: FPRM2D with ±0.1°C precision. Friendly and easy to use application. Predefined ASTM D93 A, B and C procedure. Smart sense of flash point using vapor charge value. Safe use and diagnostics of the components and sensors. Over 500.000 guarantee test results memory, long life electric igniter.
The automatic model, 750/AUT, is supplied with a automatic sensor for flash point and atmospheric pressure sensor with ±0.1Kpa precision.

Technical specifications:
– Temperature: from 40 to 360°C (104+680°F);
– Power supply: 220V 50Hz;
– Power: 800W;
– Dimensions: 33x46x57 cm;
– Weight: 26kg.