Anilina

ASTM D611 (MET.A) IP 2 (MET.A) ANILINE POINT AND MIXED ANILINE POINT OF PETROLEUM PRODUCTS AND HYDROCARBON SOLVENTS
Test Method A is suitable for transparent samples with an initial boiling point above room temperature and where the aniline point is below the bubble point and above the solidification point of the aniline-sample mixture.

ANILINE POINT METHOD “A”Aniline Point Method A
Consisting of: electric heater device with rod ans clamp, Pyrex jacket Ø40×175 mm, Pyrex test tube Ø25×150 mm, manual stirrer, two corks.

Technical specifications:
– Temperature: from ambient to 200°C (392°F)
– Power supply: 220V 50/60Hz
– Power: 600W
– Dimensions: 13x21x55 cm
– Weight: 3 kg

 

 

 

ASTM D611 (MET.B) IP 2 (MET.B) ANILINE POINT AND MIXED ANILINE POINT OF PETROLEUM PRODUCTS AND HYDROCARBON SOLVENTS
Test Method B, a thin-film method, is suitable for samples too dark for testing by Test Method A.

ANILINE POINT METHOD “B”Aniline Point Method B
Consisting of: electric heater device with electronic regulator, speed regulator for pumping and stirrer of sample and light low voltage regulator; 800 ml Pyrex jar, adjustable support for pumping motor, Pyrex tube, Pyrex pump body, stainless steel pump rotor. Blocking cover with manual bath stirrer and cooling coil for external connection.

Technical specifications:
– Temperature: from ambient to 200°C (392°F)
– Power supply: 220V 50Hz
– Power: 600W
– Dimensions: 26x26x62 cm
– Weight: 6 kg

 

ASTM D611 (MET.C) IP 2 (MET.C) ANILINE POINT AND MIXED ANILINE POINT OF PETROLEUM PRODUCTS AND HYDROCARBON SOLVENTS
Test Methods C is for samples that may vaporize appreciably at the aniline point.

ANILINE POINT METHOD “C”
Consisting of: electric heater device, test tube Ø22×150 mm, corks, support and clamp.

Technical specifications:
– Temperature: from ambient to 200°C (392°F)
– Power supply: 220V 50/60Hz
– Power: 600W

ASTM D611 (MET.D) IP 2 (MET.D) ANILINE POINT AND MIXED ANILINE POINT OF PETROLEUM PRODUCTS AND HYDROCARBON SOLVENTS
Test Methods C and D are for samples that may vaporize appreciably at the aniline point; particularly suitable where only small quantities of sample are available.

ANILINE POINT METHOD “D”
Consisting of: electric heater device, 2 ml bulb, corks, support and clamp.

Technical specifications:
– Temperature: from ambient to 200°C (392°F)
– Power supply: 220V 50/60Hz
– Power: 600W

IP 2 (MET.F) – Ed. 1956 – ANILINE POINT AND MIXED ANILINE POINT OF PETROLEUM PRODUCTS AND HYDROCARBON SOLVENTS

ANILINE POINT METHOD “F”
For IP 2 (Ed.1956). Electric heater device with electric motor stirrer, 600 ml Pyrex jar, “U-tube” in glass with metallic screen, low voltage lamp, cover in material plastic resistant to the heat, auction with helix helical inox, cooling coil, manual stirrer for the bath.

Technical specifications:
– Temperature: from ambient to 200°C (392°F)
– Power supply: 220V 50/60Hz
– Power: 600W

Tagged on: ,