ASTM D240 IP 12 HEAT OF COMBUSTION OF LIQUID HYDROCARBON FUELS BY BOMB CALORIMETER
This test method covers the determination of the heat of combustion of liquid hydrocarbon fuels ranging in volatility from that of light distillates to that of residual fuels.
ASTM D4809 ASTM d2382 (obs) HEAT OF COMBUSTION OF LIQUID HYDROCARBON FUELS BY BOMB CALORIMETER (PRECISION METHOD)
This test method covers the determination of the heat of combustion of hydrocarbon fuels. It is designed specifically for use with aviation turbine fuels when the permissible difference between duplicate determinations is of the order of 0.2 %. It can be used for a wide range of volatile and nonvolatile materials where slightly greater differences in precision can be tolerated.
ASTM D5865 ASTM D3286 (obs) GROSS CALORIFIC VALUE OF COAL AND COKE
This test method pertains to the determination of the gross calorific value of coal and coke by either an isoperibol or adiabatic bomb calorimeter.
ISO 1716 REACTION TO FIRE TESTS FOR PRODUCTS — DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE)
Method for the determination of the gross heat of combustion of products at constant volume in a bomb calorimeter.
ASTM D129 IP 61 DIN 51577 SULFUR IN PETROLEUM PRODUCTS (GENERAL BOMB METHOD)
This test method covers the determination of sulfur in petroleum products, including lubricating oils containing additives, additive concentrates, and lubricating greases that cannot be burned completely in a wick lamp. The test method is applicable to any petroleum product sufficiently low in volatility that it can be weighed accurately in an open sample boat and containing at least 0.1% sulfur.
ASTM D808 CHLORINE IN NEW AND USED PETROLEUM PRODUCTS (BOMB METHOD)
This test method covers the determination of chlorine in lubricating oils and greases, including new and used lubricating oils and greases containing additives, and in additive concentrates. Its range of applicability is 0.1 to 50 m% chlorine.
Capacity 300ml, completely made in stainless steel included the two electrodes, cover with threaded displacing ring, gasket around the cover edge, an automatic inlet valve, a pin exhaust valve. Tested at 200 bar/20 MPa.
– Dimensions: Ø10×22 cm
– Weight: 4.5 kg
Handle for extraction, 2 sectors polycarbonate cover with holes for the passing of stirrer, blade stirrer, motor stirrer 100 rpm 24V with support, double pliers for thermometer, connection for Mahler bomb electrodes. The vessel is fitted with Ignition Device including: low voltage outlet, start pushbutton, 24V socket for motor stirrer, ammeter.
– Power supply: 220V 50/60Hz
– Dimensions: 40x40x82 cm
– Weight: 29 kg