Viscometer Bath

ASTM D445 IP 71 ISO 3104 KINEMATIC VISCOSITY OF TRANSPARENT AND OPAQUE LIQUIDS (AND CALCULATION OF DYNAMIC VISCOSITY )
Procedure for the determination of the kinematic viscosity of liquid petroleum products, both transparent and opaque, by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer. The dynamic viscosity can be obtained by multiplying the kinematic viscosity by the density of the liquid.

ASTM D446 IP 71 ISO 3105 STANDARD SPECIFICATIONS AND OPERATING INSTRUCTIONS FOR GLASS CAPILLARY KINEMATIC VISCOMETERS

ASTM D2170 IP 319 KINEMATIC VISCOSITY OF ASPHALTS (BITUMENS)
Procedure for the determination of kinematic viscosity of liquid asphalts (bitumens), road oils and distillation residues of liquid asphalts (bitumens) all at 60°C (140°F) and of asphalt cements at 135°C (275°F) in the range from 6 to 100.000 mm2/s (cSt).

EN 12595 KINEMATIC VISCOSITY OF BITUMEN AND BITUMINOUS BINDERS
For the determination of the kinematic viscosity of bituminous binders at 60°C and 135 °C in the ranfge from 6 to 300.000 mm2/s (cSt). Bituminous Emulsions are not covered within the scope of this method..

VISCOMETER BATH 150°C ±0.1°Viscometer Bath 150

For the determination of the kinematic viscosity with glass capillary viscometer.
Borosilicate tank, cover with 5 holes 50.8 mm, leakage protection vessel made of tempered glass, supplied with two cork disk supporting, stainless steel control box on the cover, temperature controlled by digital thermoregulator PID with PT100 probe class A and overtemperature alarm, stainless steel heater, cooling coil for improved control near to ambient temperature, motor stirrer, safety internal level for low liquid with warning lamp. With stand-by stainless steel covers.

Technical specifications:
– Temperature: from ambient to 150°C (302°F)
– Stability: ±0.1°C
– Bath capacity: about 15 liters
– Power supply: 220V 50/60 Hz
– Power: 1200W
– Dimensions: 35x35x52 cm
– Weight: 15 kg.

VISCOMETER BATH 200°C ±0.01°

Viscometer bath 200 °C

Borosilicate tank, cover with 5 holes 50.8mm, PT100 probe class A, stainless steel heater, cooling coil for improved control near to ambient temperature, motor stirrer, safety internal level for low liquid,containment chamber.

Plate base painted with antiacid epoxidy products which houses LCD touch display 4.3” with PID controller, independent timer for each position (total 5), set up constant and automatic viscosity in cSt result, overtemperature alarm. With stand-by stainless steel covers and back led light.

Technical specifications:

– Dimensions: 57×34,5×59 cm
– Weight: 23 Kg
– Power Supply: 230V ±10%, 50/60 Hz
– Power: 1300W
– Bath capacity: about 15 liters
– Temperature: from ambient to 100 °C ±0.02° from 100 to 150 °C ±0,05°

REFRIGERATED VISCOMETER BATH -30°+60°C ±0.01°

Structure made in stainless steel, cover with 5 holes 50.8mm, temperature control by digital thermoregulator PID stability and display resolution 0.01°, bright TFT display shows all the process relevant data. User friendly interface: the functions self-explanitory and are listed in alphabetical order in each of the selected languages. Easy-control: the zoom function allow the values to be read from a distance. Set point limits, optical and acoustical alarm, mains failure automatic function, graphic function, programmer with 3 programs each with 5 steps, temperature control mode(internal process), TAC (Tru adaptive control), self-optimising internal and cascade control, ramp function. Refrigeration system with ecological compressor CFC free R404A, stand-by stainless steel and back light.

Technical specifications:
– Temperature: from -30° to +60°C (-22 +140°F)
– Stability: ±0.01°C
– Bath capacity: 28 about liters
– Power supply: 220V 50Hz
– Power: 3500W