Fuel Analysis

Water Reaction

[su_note note_color=”#e3e3e1″] ASTM D1094 WATER REACTION OF AVIATION FUELS This test method covers the determination of the presence of water-miscible components in aviation gasoline and turbine fuels, and the effect of these components on volume change and on the fuel-water…

Smoke Point

[su_note note_color=”#e3e3e1″] ASTM D1322 IP 57 SMOKE POINT OF KEROSINE AND AVIATION TURBINE FUEL This test method covers two procedures for determination of the smoke point of kerosine and aviation turbine fuel, a manual procedure and an automated procedure, which…

Sulfur – Lamp Method

[su_note note_color=”#e3e3e1″] ASTM D1266 IP 107 SULFUR IN PETROLEUM PRODUCTS (LAMP METHOD) This test method covers the determination of total sulfur in liquid petroleum products in concentrations from 0.01 to 0.4 mass%. A special sulfate analysis procedure is described in…

Heat of Combustion

[su_note note_color=”#e3e3e1″] ASTM D240 IP 12 HEAT OF COMBUSTION OF LIQUID HYDROCARBON FUELS BY BOMB CALORIMETER This test method covers the determination of the heat of combustion of liquid hydrocarbon fuels ranging in volatility from that of light distillates to…

Isolation

[su_note note_color=”#e3e3e1″] ASTM D2002 (obs) ISOLATION OF REPRESENTATIVE SATURATES FRACTION FROM LOW-OLEFINIC PETROLUEM NAPHTHAS Procedure for determination of isolation of representative saturates fraction from low-olefinic petroleum naphthas with distillation below at 240°C (400°F) with <1% olefinic petroleum [/su_note] FRACTIONAL COLUMN…

Depentanization

[su_note note_color=”#e3e3e1″] ASTM D2001 DEPENTANIZATI ON OF GASOLINE AND NAPHTHAS This test method covers the removal of pentanes and lighter hydrocarbons from gasolines, naphthas, and similar petroleum distillates to prepare samples suitable for the determination of hydrocarbon types in accordance…

FIA

[su_note note_color=”#e3e3e1″] ASTM D1319 IP 156 ISO 3837 HYDROCARBON TYPES IN LIQUID PETROLEUM PRODUCTS BY FLUORESCENT INDICATOR ADSORPTION This test method covers the determination of hydrocarbon types over the concentration ranges from 5 to 99 volume % aromatics, 0.3 to…

Anilina

[su_note note_color=”#e3e3e1″] ASTM D611 (MET.A) IP 2 (MET.A) ANILINE POINT AND MIXED ANILINE POINT OF PETROLEUM PRODUCTS AND HYDROCARBON SOLVENTS Test Method A is suitable for transparent samples with an initial boiling point above room temperature and where the aniline…

Density Bath

[su_note note_color=”#e3e3e1″] ASTM D287 API GRAVITY OF CRUDE PETROLEUM AND PETROLEUM PRODUCTS This test method covers the determination by means of a glass hydrometer in conjunction with a series of calculations of the API gravity of crude petroleum and petroleum…