Grease

Dropping point Ubbelhode

[su_note note_color=”#e3e3e1″] DIN 51801-2 (obs) DETERMINATION OF DROPPING POINT UBBELHODE METHOD FOR BITUMINOUS BINDERS This test method covers the determination of the dropping point of lubricating grease. [/su_note] DROPPING POINT UBBELHODE Consisting of: a chromium-plated brass cup, a Ø40×240 mm…

Drop point petrolatum

[su_note note_color=”#e3e3e1″] IP 31 (obs) IP 371 DROP POINT OF PETROLATUM [/su_note] DROP POINT PETROLATUM Consisting of: a chromium-plated brass cup, a Ø40×240 mm test tube, a cap, a 400 ml beaker, an anticorodal cover, heating device unit and motor…

Dropping point high temperature

[su_note note_color=”#e3e3e1″] ASTM D2265 DROPPING POINT OF LUBRICATING GREASE OVER WIDE TEMPERATURE RANGE [/su_note] DROPPING POINT HIGH TEMPERATURE Composed by a furnace to aluminum block to 6 places, structure in stainless steel, insulating thermal; in the block 6 vertical holes…

Dropping point

[su_note note_color=”#e3e3e1″] ASTM D566 IP 132 ISO 2176 DIN 51801-1 DROPPING POINT OF LUBRICATING GREASE This test method covers the determination of the dropping point of lubricating grease. This test method is not recommended for use at bath temperatures above…

Corrosion

[su_note note_color=”#e3e3e1″] ASTM D1743 DETERMINING CORROSION PREVENTIVE PROPERTIES OF LUBRICATING GREASES This test method covers the determination of the corrosion preventive properties of greases using grease-lubricated tapered roller bearings stored under wet conditions. This test method is based on CRC…

Water washout

[su_note note_color=”#e3e3e1″] ASTM D1264 IP 215 DETERMINING THE WATER WASHOUT CHARACTERISTICS OF LUBRICATING GREASES This test method covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38 and 79°C…

Wheel bearing grease

[su_note note_color=”#e3e3e1″] ASTM D1263 (obs) LEAKAGE TENDENCIES OF AUTOMOTIVE WHEEL BEARIN GREASES This test method covers the evaluation of the leakage tendencies of wheel bearing greases when tested under prescribed laboratory conditions. [/su_note] WHEEL BEARING APPARATUS Thermostatic cabin equipped with…

Evaporation greases dry bath

[su_note note_color=”#e3e3e1″] ASTM D2595 EVAPORATION LOSS OF LUBRICATING GREASES OVER WIDE-TEMPERATURE RANGE This test method covers the determination of evaporation loss of lubricating greases at temperatures between 93 and 316°C (200 and 600°F). This test method is intended to augment…

Evaporation greases bath

[su_note note_color=”#e3e3e1″] ASTM D972 IP 183 EVAPORATION LOSS OF LUBRICATING GREASES AND OILS This test method covers the determination of the loss in mass by evaporation of lubricating greases and oils for applications where evaporation loss is a factor. Evaporation…

Greases separation ASTM

[su_note note_color=”#e3e3e1″] ASTM D6184 FTM 791-321 OIL SEPARATION FROM LUBRICATING GREASE (CONICAL SIEVE METHOD) This test method covers the determination of the tendency of lubricating grease to separate oil at an elevated temperature. This test method shall be conducted at…